Sewi/Firmware/examples/driver_examples.c
2026-02-07 16:41:08 +01:00

84 lines
1.6 KiB
C

/*
* Code generated from Atmel Start.
*
* This file will be overwritten when reconfiguring your Atmel Start project.
* Please copy examples or other code you want to keep to a separate file
* to avoid losing it when reconfiguring.
*/
#include "driver_examples.h"
#include "driver_init.h"
#include "utils.h"
/**
* Example of using ADC_0 to generate waveform.
*/
void ADC_0_example(void)
{
uint8_t buffer[2];
adc_sync_enable_channel(&ADC_0, 0);
while (1) {
adc_sync_read_channel(&ADC_0, 0, buffer, 2);
}
}
static void button_on_PA15_pressed(void)
{
}
/**
* Example of using EXTERNAL_IRQ_0
*/
void EXTERNAL_IRQ_0_example(void)
{
ext_irq_register(PIN_PA15, button_on_PA15_pressed);
}
void delay_example(void)
{
delay_ms(5000);
}
static struct timer_task TIMER_0_task1, TIMER_0_task2;
/**
* Example of using TIMER_0.
*/
static void TIMER_0_task1_cb(const struct timer_task *const timer_task)
{
}
static void TIMER_0_task2_cb(const struct timer_task *const timer_task)
{
}
void TIMER_0_example(void)
{
TIMER_0_task1.interval = 100;
TIMER_0_task1.cb = TIMER_0_task1_cb;
TIMER_0_task1.mode = TIMER_TASK_REPEAT;
TIMER_0_task2.interval = 200;
TIMER_0_task2.cb = TIMER_0_task2_cb;
TIMER_0_task2.mode = TIMER_TASK_REPEAT;
timer_add_task(&TIMER_0, &TIMER_0_task1);
timer_add_task(&TIMER_0, &TIMER_0_task2);
timer_start(&TIMER_0);
}
/**
* Example of using WDT_0.
*/
void WDT_0_example(void)
{
uint32_t clk_rate;
uint16_t timeout_period;
clk_rate = 1000;
timeout_period = 4096;
wdt_set_timeout_period(&WDT_0, clk_rate, timeout_period);
wdt_enable(&WDT_0);
}